去年学习了2.34的安装方法，后来换了Ubuntu 11.10后重新安装发现NS升级到2.35，官方手册还是使用11年04月的那份。我个人建议学习英文版的手册，因为版本新，里面有一些新添加的东西。中文汉化的手册版本都比较旧，基本都是08年以前的。当然这个因人而异了，
去年学习了2.34的安装方法，后来换了Ubuntu 11.10后重新安装发现NS升级到2.35，官方手册还是使用11年04月的那份。我个人建议学习英文版的手册，因为版本新，里面有一些新添加的东西。中文汉化的手册版本都比较旧，基本都是08年以前的。当然这个因人而异了，中文版看着容易一些并且做了美工，英文版原汁原味。萝卜白菜，各有所爱。
那么现在就来说说最新2.35的安装方法。大家发现2.34安装时要修复不少小问题，可喜的是2.35里面都得到了修正，所以安装起来要容易得多，接下来说说具体的步骤吧。
1.安装必备包，和2.34一样
sudo apt-get install build-essential
sudo apt-get install tcl8.4 tcl8.4-dev tk8.4 tk8.4-dev
sudo apt-get install libxmu-dev libxmu-headers
sudo apt-get install xorg-dev g++ xgraph
sudo apt-get install g++-4.4
2.将下载好的tar包放到自己想要放置的位置，然后在Terminal进入ns-allinone-2.35文件夹下直接安装
sudo ./install
3.漫长的等待后会出现类似
Please put /usr/local/ns2/ns-allinone-2.34/bin:/usr/local/ns2/ns-allinone-2.34/tcl8.4.18/unix:/usr/local/ns2/ns-allinone-2.34/tk8.4.18/unix
into your PATH environment; so that you'll be able to run itm/tclsh/wish/xgraph.
IMPORTANT NOTICES:
(1) You MUST put /usr/local/ns2/ns-allinone-2.34/otcl-1.13, /usr/local/ns2/ns-allinone-2.34/lib,
into your LD_LIBRARY_PATH environment variable.
If it complains about X libraries, add path to your X libraries
into LD_LIBRARY_PATH.
If you are using csh, you can set it like:
setenv LD_LIBRARY_PATH <paths>
If you are using sh, you can set it like:
export LD_LIBRARY_PATH=<paths>
(2) You MUST put /usr/local/ns2/ns-allinone-2.34/tcl8.4.18/library into your TCL_LIBRARY environmental
variable. Otherwise ns/nam will complain during startup.
After these steps, you can now run the ns validation suite with
cd ns-2.34; ./validate
For trouble shooting, please first read ns problems page
http://www.isi.edu/nsnam/ns/ns-problems.html. Also search the ns mailing list archive
for related posts.
root@www:/usr/local/ns2/ns-allinone-2.34#
表明你安装成功了。这时只需更改几个参数：
先输入gedit ~/.bashrc
之后在文本的最后添加
export PATH="$PATH:/usr/local/ns2/ns-allinone-2.35/bin:/usr/local/ns2/ns-allinone-2.35/tcl8.5.10/unix:/usr/local/ns2/ns-allinone-2.35/tk8.5.10/unix"
export LD_LIBRARY_PATH="/usr/local/ns2/ns-allinone-2.35/otcl-1.14:/usr/local/ns2/ns-allinone-2.35/lib"
export TCL_LIBRARY="$TCL_LIBRARY:usr/local/ns2/ns-allinone-2.35/tcl8.5.10/library"
相对路径，请更改为自己安装的路径。
之后在Terminal输入ns，显示%就表示运行成功了。可以编辑一个test.tcl文件，里面输入手册一开始提到的例子：
# The preamble
set ns [new Simulator]
;# initialise the simulation
# Predefine tracing
set f [open out.tr w]
$ns trace-all $f
set nf [open out.nam w]
$ns namtrace-all $nf
set n0 [$ns node]
set n1 [$ns node]
set n2 [$ns node]
set n3 [$ns node]
$ns duplex-link $n0 $n2 5Mb 2ms DropTail
$ns duplex-link $n1 $n2 5Mb 2ms DropTail
$ns duplex-link $n2 $n3 1.5Mb 10ms DropTail
# Some agents.
set udp0 [new Agent/UDP]
$ns attach-agent $n0 $udp0
set cbr0 [new Application/Traffic/CBR]
$cbr0 attach-agent $udp0
$udp0 set class_ 0
;# A UDP agent
;# on node $n0
;# A CBR traffic generator agent
;# attached to the UDP agent
;# actually, the default, but. . .
;# Its sink
;# on node $n3
set null0 [new Agent/Null]
$ns attach-agent $n3 $null0
$ns connect $udp0 $null0
$ns at 1.0 "$cbr0 start"
puts [$cbr0 set packetSize_]
puts [$cbr0 set interval_]
# A FTP over TCP/Tahoe from $n1 to $n3, flowid 2
set tcp [new Agent/TCP]
$tcp set class_ 1
$ns attach-agent $n1 $tcp
set sink [new Agent/TCPSink]
$ns attach-agent $n3 $sink
;# TCP does not generate its own traffic
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ns at 1.2 "$ftp start"
$ns connect $tcp $sink
$ns at 1.35 "$ns detach-agent $n0 $tcp ; $ns detach-agent $n3 $sink"
# The simulation runs for 3s.
# The simulation comes to an end when the scheduler invokes the finish{} procedure below.
# This procedure closes all trace files, and invokes nam visualization on one of the trace files.
$ns at 3.0 "finish"
proc finish {} {
global ns f nf
$ns flush-trace
close $f
close $nf
puts "running nam..."
exec nam out.nam &
exit 0
}
# Finally, start the simulation.
$ns run
保存之后，Terminal进入文件所在文件夹，运行ns test.tcl，一旦成功会打开nam显示模拟情况。
最后，补充一个有用的软件gnuplot，画图利器。
sudo apt-get install gnuplot
声明： 此文观点不代表本站立场；转载须要保留原文链接；版权疑问请联系我们。
